Skip to main content Skip to search Skip to main navigation
Bewertungsdurchschnitt mit

Average rating of 4.9 out of 5 stars

(4.91/5.00) aus insgesamt 2914 Bewertungen

Faucet

  • Equipped with high-quality brand ceramic cartridge
  • Features a 2-way diverter
  • The faucet is made entirely of solid brass, premium chrome-plated
  • 1/2" standard internal thread
  • Bottom outlet with 3/4" internal thread

Operation

  • The upper diverter allows switching between outlets. After turning off the water with the lower single-lever mixer, the diverter returns to its original position. In the rest position, the lower outlet is active.

Note

This item includes an integrated base body and is ready for installation; no additional components are required.

Shower Head

  • Made of plastic
  • Premium chrome-plated
  • Diameter 24.5 cm
  • Thickness 2 cm
  • 150 anti-calc nozzles
  • Brass ball joint, chrome-plated

Supply Arm for Shower Heads

  • Round design wall arm
  • Made of solid brass
  • High-quality chrome finish
  • Cover plate with O-ring seal
  • Projection 33 cm
  • 1/2" thread

Wall Connection Elbow

  • Made of solid brass
  • High-quality chrome finish
  • Backflow prevention according to DIN EN 1717
  • 1/2" internal thread wall connection

Hand Shower

  • Made of plastic
  • Premium chrome-plated
  • Features 2 functions: Rain & Massage spray
  • Includes 60 anti-calc nozzles + 10 nozzles for the massage spray
  • Length 24 cm
  • Diameter 10 cm

Shower Bar

  • Round shower bar with cross handle
  • All parts made of solid brass
  • High-quality chrome finish
  • Adjustable angle of the holder
  • Length 70 cm
  • Distance between mounting holes 63 - 65 cm

Shower Hose Length 160 cm

  • The double-sided 1/2" swivel cones prevent twisting of the hose.
  • Made of stainless steel, high-gloss polished
  • Double winding (overlapping) for high tensile strength
  • Kink-resistant, durable, flexible
  • Swivel cones made of solid brass, premium chrome-plated
  • Certified: KTW recommendation, EN 1113, NF077
  • Made in Germany

Versand

  • Versandgewicht: 5.15 Kg
  • Versandart: Paket

Produktsicherheitsverordnung

Angaben zum Hersteller:

Name des Herstellers: PaulGurkes GmbH

Postanschrift: Bördestr. 7, 31135 Hildesheim, Deutschland

Elektronische Adresse: anfrage@paulgurkesshop.de


Letztes Update: 08.04.2026, 18:44:01

Für dieses Produkt wurden noch keine Kundenbilder hochgeladen.

Weitere Kundenbilder zu im Set enthaltenen Produkten

PaulGurkes Design Concealed Shower Mixer Bathtub Faucet with Round Diverter

PGBM34

€129.00*

PaulGurkes Wall Arm for Round Shower Heads

PG9E

€33.90*

PaulGurkes Metal Shower Rod with Cross Handle

PG6100

€124.90*

PaulGurkes Round Hand Shower

PG3340B

€24.90*

PaulGurkes Round Wall Connector

PG8N

€29.90*

PaulGurkes Stainless Steel Shower Hose 160cm with Swivel Connectors

PGdoubleAgraff160

€20.85*

Dokumente der im Set enthaltenen Produkte

PGBM34

[pdf] Analysebericht-PGBM34
Analysis Report Header
AnalyseberichtAnalysis Report
Die Probe wurde mittels Röntgenfluoreszenzanalyse getestet und hat folgendes Messergebnis erbracht.The sample was tested using X-ray fluorescence analysis and yielded the following result.
Report Details
Bericht-Nr.: #2017-75Report No.: #2017-75
Herstellernummer: PGBM34Manufacturer Number: PGBM34
Element Composition Table
Kupfer Cu 59,872 ± 0,522 57,000 60,000Copper Cu 59.872 ± 0.522 57.000 60.000
Zink Zn 37,983 ± 0,454 37,000 41,500Zinc Zn 37.983 ± 0.454 37.000 41.500
Blei Pb 1,807 ± 0,157 1,600 2,200Lead Pb 1.807 ± 0.157 1.600 2.200
Zinn Sn 0,000 0,300Tin Sn 0.000 0.300
Eisen Fe 0,085 ± 0,037 0,000 0,300Iron Fe 0.085 ± 0.037 0.000 0.300
Nickel Ni 0,000 0,100Nickel Ni 0.000 0.100
Aluminium Al 0,000 0,050Aluminum Al 0.000 0.050
Compliance Statements
Der Nachweis über die Eignung in Trinkwasserinstallationen nach Trinkwasserverordnung (TrinkwV 2001) ist somit erbracht.The verification of suitability in drinking water installations according to the Drinking Water Ordinance (TrinkwV 2001) is thus provided.
Das geprüfte Material entspricht den Vorgaben des Umweltbundesamtes bezüglich der „Bewertungsgrundlagen für metallene Werkstoffe im Kontakt mit Trinkwasser“- UBA-Positivliste. Der Werkstoff erfüllt laut Umweltbundesamt die Norm DIN 50930-6, die Aussagen bezüglich der Korrosionsbeständigkeit darlegt.The tested material complies with the requirements of the German Environment Agency (Umweltbundesamt) regarding the "Assessment principles for metallic materials in contact with drinking water" - UBA positive list. According to the German Environment Agency, the material meets the DIN 50930-6 standard, which makes statements regarding corrosion resistance.
Material Information
Werkstoff: CW617N (CuZn40Pb2)Material: CW617N (CuZn40Pb2)
Signatures and Dates
Olaf Manusch GeschäftsführerOlaf Manusch Managing Director
Hildesheim, Montag, 3. April 2017Hildesheim, Monday, April 3, 2017
Marc Manusch Leitung Technik & QualitätswesenMarc Manusch Head of Engineering & Quality Management
Footer
Umweltbundesamt: „Bewertungsgrundlage für metallene Werkstoffe im Kontakt mit Trinkwasser“, (abgerufen am 03.04.2017).German Environment Agency: "Assessment basis for metallic materials in contact with drinking water", (accessed on 04/03/2017).
[pdf] PGBM34_Anordnungsplan
Komponentenliste
[pdf] PGBM34-v1.0
General Information
Unterputz Einhandmischer 2-Wege Artikelnummer: PGBM34 Paul Gurkes GmbHConcealed Single-Lever Mixer 2-Way Article Number: PGBM34 Paul Gurkes GmbH
Components and Technical Data
Nr. Komponente Anzahl 1 Unterputzelement 1 2 Blende 1 3 Pin 1 4 Madenschraube 1 5 Griff 1 6 Umstellerknopf 1No. Component Quantity 1 Concealed element 1 2 Escutcheon 1 3 Pin 1 4 Grub screw 1 5 Handle 1 6 Diverter knob 1
Technische Daten Keramikkartusche KTW-Zulassung für Trinkwasser Empfohlener Druck 1-5 Bar Öffnungswinkel 25° Maximale Temperatur 90° Lebensdauer 70.000 Zyklen (EN 817) Rotation 90°Technical data Ceramic cartridge KTW approval for drinking water Recommended pressure 1-5 bar Opening angle 25° Maximum temperature 90° Lifespan 70,000 cycles (EN 817) Rotation 90°
Operating Instructions
Bedienung • Standardmäßig ist der untere Ausgang aktiv. Nach Betätigen des Umstellers der obere Ausgang. • Nach Abstellen des Wassers springt der Umsteller in seine Ausgangsposition zurück.Operation • By default, the lower outlet is active. After operating the diverter, the upper outlet. • After the water is turned off, the diverter returns to its original position.
Installation Notes
• Die zwei Zentimeter können für den Fliesenspiegel genutzt werden. Achten Sie insbesondere auf die Einbautiefe von 5,5cm. • Sollte die Armatur zu tief in die Wand gebaut sein, dann ist der Umsteller nicht zu Bedienen. • Die Verjüngung am Umsteller muss nach der Montage aus den Fliesen schauen. • Sanitärinstallateur und Fliesenleger müssen sich gegenseitig koordinieren, damit die Armatur nicht zu tief in die Wand montiert wird.• The two centimeters can be used for the tile mirror. Pay particular attention to the installation depth of 5.5cm. • If the faucet is built too deep into the wall, the diverter cannot be operated. • The taper on the diverter must be visible from the tiles after installation. • Plumbers and tilers must coordinate with each other so that the faucet is not mounted too deep in the wall.
Installationstipps • Um den Unterputzkörper so weit wie möglich „nach vorne” zu bringen, können Sie mittels jeweils zwei 90° Bögen an den seitlichen 1/2" Zugängen die Armatur weiter aus der Wand holen.Installation tips • In order to bring the concealed body as far "forward" as possible, you can use two 90° elbows each on the side 1/2" connections to bring the faucet further out of the wall.
Assembly Instructions
Montagehinweis • Um das Unterputzelement weit genug aus der Wand zu holen, sind zwei 90° 1/2″ Winkel geeignet. Die in der Wand verlegten Zuleitungen können dadurch tiefer in der Wand liegen. • Achten Sie insbesondere dadrauf, dass die Verjüngung des Umstellers nach der Installation aus der Abdeckblende hervorschaut und der dickere Teil des Umstellers mit der Blende abdichtet.Assembly instructions • In order to get the concealed element far enough out of the wall, two 90° 1/2″ angles are suitable. The supply lines laid in the wall can thus lie deeper in the wall. • Pay particular attention to the fact that the taper of the diverter protrudes from the cover plate after installation and the thicker part of the diverter seals with the cover plate.
Wir behalten uns das Recht vor, Aktualisierungen, Änderungen oder Ergänzungen an den bereitgestellten Informationen und Daten vorzunehmen.We reserve the right to make updates, changes or additions to the information and data provided.
Analyseberichte - PGBM34 - Version 1
Analysis Report
Analysis Report The sample was tested using X-ray fluorescence analysis and yielded the following measurement result. Suitability for drinking water installations according to the Drinking Water Regulation (TrinkwV 2001) is hereby demonstrated. The tested material complies with the requirements of the Federal Environment Agency regarding "Assessment criteria for metallic materials in contact with drinking water" - UBA - positive list. According to the Federal Environment Agency, the material meets the standard DIN 50930-6, which sets out requirements for corrosion resistance.
Material
Material CW617N (CuZn40Pb2)
Manufacturer Information
Report Number #2017-75
Manufacturer Number PGBM34
EAN 4250914801316
Company Name PaulGurkes GmbH
Street Klingenbergstr. 12
City 31139 Hildesheim
Analysis Report XL2-99147
Measurement Number 75
Mode Alloys
Measurement Duration 10.7s
Time 10.03.2017 10:26:47
Manufacturer Number PGBM34
User Login Marc Manusch
Material Proposal CW617N_CuZn40Pb2
Element Analysis
Element % | ± 2σ | Min | Max
Copper Cu 59.872 | ± 0.522 | 57.000 | 60.000
Zinc Zn 37.983 | ± 0.454 | 37.000 | 41.500
Lead Pb 1.807 | ± 0.157 | 1.600 | 2.200
Tin Sn 0.000 | - | - | 0.300
Iron Fe 0.085 | ± 0.037 | 0.000 | 0.300
Nickel Ni 0.000 | - | - | 0.100
Aluminium Al 0.000 | - | - | 0.050
Signatories
Management Olaf Manusch - Managing Director
Management Marc Manusch - Head of Engineering and Quality
Date and Place
Date and Place Hildesheim, Monday, April 3, 2017
Source
Source Federal Environment Agency: "Assessment criteria for metallic materials in contact with drinking water", (accessed 03.04.2017).

PG8N

[pdf] PG8N-v1.0
WandanschlussbogenWall Connection Elbow
Artikelnummer: PG8NArticle Number: PG8N
KomponentenComponents
Nr. KomponenteNo. Component
AnzahlQuantity
BlendeCover
GrundkörperBase Body
DichtungSeal
GewindeThread
RückflussverhindererBackflow Preventer
Stecken Sie die Blende über das 1/2" Gewinde in der Wand.Place the cover over the 1/2" thread in the wall.
Drehen Sie den Grundkörper auf das Gewinde. Achten Sie dadrauf, dass Sie die Blende nicht zerkratzen.Turn the base body onto the thread. Be careful not to scratch the cover.
Drehen Sie den Duschschlauch auf das vorgesehene Gewinde.Turn the shower hose onto the intended thread.
Säuberung & WartungCleaning & Maintenance
Um eine gleichbleibende Qualität zu gewährleisten, ist folgendes zu beachten:To ensure consistent quality, the following should be observed:
Mit sauberem Wasser abspülen & mit Mikrofasertuch trocknen.Rinse with clean water & dry with a microfiber cloth.
Schmutz nur mit milden Reinigungsmitteln entfernen.Remove dirt only with mild cleaning agents.
Benutzen Sie keine Scheuermilch, Polierpaste, Papiertücher, etc.Do not use abrasive cleaners, polishing paste, paper towels, etc.
Benutzen Sie keine säurehaltigen Reinigungsmittel oder Seife.Do not use acidic cleaning agents or soap.
PaulGurkes QualitätPaulGurkes Quality
Herzlichen Glückwunsch zum Kauf Ihres PaulGurkes Qualitätsproduktes. Unsere Produkte sind technisch ausgereift und unter Verwendung hochwertiger Materialien gefertigt.Congratulations on purchasing your PaulGurkes quality product. Our products are technically sophisticated and made using high-quality materials.
Jedes Produkt unterzieht sich einer handverlesenen Qualitätskontrolle.Each product undergoes a hand-picked quality control.
Sollten Sie mit unseren Produkten nicht zufrieden sein, kontaktieren Sie uns.If you are not satisfied with our products, please contact us.
Wir behalten uns das Recht vor, Aktualisierungen, Änderungen oder Ergänzungen an den bereitgestellten Informationen und Daten vorzunehmen.We reserve the right to make updates, changes or additions to the information and data provided.

[PDF] Allgemeine Pflegehinweise
Anwendung: Kalt- und Warmwasserversorgung
Anwendungsbereich: Duschkabine
Farbe: Chrom

0 of 0 reviews

Average rating of 0 out of 5 stars

Leave a review!

Share your experiences with other customers.


Laden...

3D-Modell wird geladen...

Maus: Drehen | Scrollen: Zoom | Rechtsklick: Verschieben Finger: Drehen | Pinch: Zoom | Zwei Finger: Verschieben