Skip to main content Skip to search Skip to main navigation
Bewertungsdurchschnitt mit

Average rating of 4.9 out of 5 stars

(4.91/5.00) aus insgesamt 2934 Bewertungen

Operation

  • The upper switch is used to select the outlets, such as handheld shower, rain shower, or bathtub filler. Additionally, the water intensity is adjusted between the switch positions.
  • The lower switch regulates the water temperature. Due to the 38°C scald protection, a safety button on the lower control must be pressed to allow further adjustment of the thermostat for higher temperatures.

General Data

  • 3-Way Thermostat Mixer
  • Equipped with a high-quality branded thermostat cartridge
  • Backflow prevention compliant with DIN EN 1717
  • Hot/cold water supply secured with backflow preventer
  • Made of solid brass
  • With high-quality chrome finish
  • Cover plate 12 x 20 cm
  • Internal thread 1/2"
  • Control elements made of high-quality plastic
  • Installation depth 65-90 mm

Note

This item comes with an integrated base body and is ready for installation; no additional components are required.

Shower Head

  • Made of solid brass
  • High-quality chrome finish
  • 20 x 20 cm
  • Rear screw connection (easy to clean)
  • With ECO flow limiter 10 L/min
  • 1/2" ball joint

Supply Arm for Shower Heads

  • Square wall arm
  • Made of solid brass
  • High-quality chrome finish
  • Pipe 3.5 x 1.5 cm
  • Length 38.5 cm (without thread 34.5 cm)
  • 1/2" thread

Bathtub Inlet

  • Designer bathtub filler
  • Made of solid brass
  • Chrome plated
  • Overflow inlet
  • Outlet 2.5 x 4.5 x 14 cm
  • Cover plate 5.5 cm x 7.5 cm
  • 1/2" thread

Wall Connection Bend with Shower Holder

  • Flat design
  • Made of solid brass
  • High-quality chrome finish
  • Backflow prevention compliant with DIN EN 1717
  • 1/2" external thread

Handheld Shower

  • Square stick shower
  • Made of solid brass
  • High-quality chrome finish
  • 1 function
  • 44 anti-lime nozzles
  • Length 20.2 cm (with thread 21.8 cm)
  • 1.5 x 3.5 cm

Shower Hose Length 160 cm

  • The double-sided 1/2" swivel cones prevent twisting of the hose.
  • Made of stainless steel, polished to a high gloss
  • Double winding (overlapping) for high tensile strength
  • Kink-resistant, durable, flexible
  • Swivel cones made of solid brass, high-quality chrome plated
  • Certified: KTW recommendation, EN 1113, NF077
  • Made in Germany

Versand

  • Versandgewicht: 6.4 Kg
  • Versandart: Paket

Produktsicherheitsverordnung

Angaben zum Hersteller:

Name des Herstellers: PaulGurkes GmbH

Postanschrift: Bördestr. 7, 31135 Hildesheim, Deutschland

Elektronische Adresse: anfrage@paulgurkesshop.de


Letztes Update: 08.04.2026, 18:44:03

Für dieses Produkt wurden noch keine Kundenbilder hochgeladen.

Weitere Kundenbilder zu im Set enthaltenen Produkten

PaulGurkes Concealed Thermostat 3-Way Square Mixer Shower Valve

PGJW4-3W-E

€159.00*

PaulGurkes Rain Shower Head 20cm Brass

PGHPME20

€99.00*

PaulGurkes Wall Arm for Rectangular Shower Head

PG9Q

€49.00*

PaulGurkes Square Brass Hand Shower

PGHPBHS009

€37.90*

PaulGurkes Wall Connector with Shower Holder, Square Brass Bend

PGHP009

€44.00*

PaulGurkes Bathtub Spout Square Inlet

PG8T

€59.00*

PaulGurkes Stainless Steel Shower Hose 160cm with Swivel Connectors

PGdoubleAgraff160

€20.85*

Dokumente der im Set enthaltenen Produkte

PGJW4-3W-E

[pdf] Analysebericht-PGJW4-3W
Analysis Report Header
AnalyseberichtAnalysis Report
Introduction
Die Probe wurde mittels Röntgenfluoreszenzanalyse getestet und hat folgendes Messergebnis erbracht.The sample was tested using X-ray fluorescence analysis and yielded the following measurement result.
Report Information
Bericht-Nr.: #2017-76Report No.: #2017-76
Herstellernummer: PGJW4-3WManufacturer Number: PGJW4-3W
Material Composition Table
Kupfer Cu 59,675 ± 0,423 57,000 60,000Copper Cu 59.675 ± 0.423 57.000 60.000
Zink Zn 38,435 ± 0,371 37,000 41,500Zinc Zn 38.435 ± 0.371 37.000 41.500
Blei Pb 1,743 ± 0,127 1,600 2,200Lead Pb 1.743 ± 0.127 1.600 2.200
Eisen Fe 0,055 ± 0,028 0,000 0,300Iron Fe 0.055 ± 0.028 0.000 0.300
Nickel Ni 0,000 0,100Nickel Ni 0.000 0.100
Zinn Sn 0,000 0,300Tin Sn 0.000 0.300
Aluminium Al 0,000 0,050Aluminum Al 0.000 0.050
Compliance Statements
Der Nachweis über die Eignung in Trinkwasserinstallationen nach Trinkwasserverordnung (TrinkwV 2001) ist somit erbracht.Proof of suitability for drinking water installations according to the Drinking Water Ordinance (TrinkwV 2001) has thus been provided.
Das geprüfte Material entspricht den Vorgaben des Umweltbundesamtes bezüglich der „Bewertungsgrundlagen für metallene Werkstoffe im Kontakt mit Trinkwasser“- UBA-Positivliste. Der Werkstoff erfüllt laut Umweltbundesamt die Norm DIN 50930-6, die Aussagen bezüglich der Korrosionsbeständigkeit darlegt.The tested material complies with the requirements of the German Federal Environment Agency regarding the "Assessment criteria for metallic materials in contact with drinking water" - UBA positive list. According to the German Federal Environment Agency, the material meets the DIN 50930-6 standard, which provides information on corrosion resistance.
Material Designation
Werkstoff: CW617N (CuZn40Pb2)Material: CW617N (CuZn40Pb2)
Signatures and Dates
Olaf Manusch GeschäftsführerOlaf Manusch Managing Director
Hildesheim, Montag, 3. April 2017Hildesheim, Monday, April 3, 2017
Marc Manusch Leitung Technik & QualitätswesenMarc Manusch Head of Technology & Quality Assurance
Reference
Umweltbundesamt: „Bewertungsgrundlage für metallene Werkstoffe im Kontakt mit Trinkwasser“, (abgerufen am 03.04.2017).German Federal Environment Agency: "Assessment basis for metallic materials in contact with drinking water", (accessed on 03.04.2017).

PG9Q

[pdf] Analysebericht-PG9Q
Analysis Report Header
AnalyseberichtAnalysis Report
Die Probe wurde mittels Röntgenfluoreszenzanalyse getestet und hat folgendes Messergebnis erbracht.The sample was tested using X-ray fluorescence analysis and yielded the following measurement result.
Report Information
Bericht-Nr.: #2017-383Report No.: #2017-383
Herstellernummer: PG9QManufacturer Number: PG9Q
Elemental Composition Table
Kupfer Cu 61,041 ± 0,989 58,000 63,000Copper Cu 61.041 ± 0.989 58.000 63.000
Zink Zn 37,556 ± 0,854 33,500 41,500Zinc Zn 37.556 ± 0.854 33.500 41.500
Blei Pb 0,990 ± 0,230 0,200 1,400Lead Pb 0.990 ± 0.230 0.200 1.400
Eisen Fe 0,274 ± 0,100 0,000 0,300Iron Fe 0.274 ± 0.100 0.000 0.300
Nickel Ni 0,137 ± 0,080 0,000 0,200Nickel Ni 0.137 ± 0.080 0.000 0.200
Zinn Sn 0,000 ± 0,213 0,000 0,500Tin Sn 0.000 ± 0.213 0.000 0.500
Mangan Mn 0,000 ± 0,078 0,000 0,050Manganese Mn 0.000 ± 0.078 0.000 0.050
Silizium Si 0,000 0,050Silicon Si 0.000 0.050
Aluminium Al 0,300 0,900Aluminum Al 0.300 0.900
Compliance Statement
Der Nachweis über die Eignung in Trinkwasserinstallationen nach Trinkwasserverordnung (TrinkwV 2001) ist somit erbracht.The proof of suitability for drinking water installations according to the Drinking Water Ordinance (TrinkwV 2001) is thus provided.
Das geprüfte Material entspricht den Vorgaben des Umweltbundesamtes bezüglich der „Bewertungsgrundlagen für metallene Werkstoffe im Kontakt mit Trinkwasser“- UBA- Positivliste. Der Werkstoff erfüllt laut Umweltbundesamt die Norm DIN 50930-6, die Aussagen bezüglich der Korrosionsbeständigkeit darlegt.The tested material complies with the requirements of the German Federal Environment Agency regarding the "Assessment bases for metallic materials in contact with drinking water"- UBA positive list. According to the Federal Environment Agency, the material meets the DIN 50930-6 standard, which provides information on corrosion resistance.
Material Designation
Werkstoff: CC757S (CuZn39Pb1Al-C)Material: CC757S (CuZn39Pb1Al-C)
Signatures and Date
Olaf Manusch GeschäftsführerOlaf Manusch Managing Director
Hildesheim, Samstag, 8. April 2017Hildesheim, Saturday, April 8, 2017
Marc Manusch Leitung Technik & QualitätswesenMarc Manusch Head of Engineering & Quality Management
Footnote
Umweltbundesamt: „Bewertungsgrundlage für metallene Werkstoffe im Kontakt mit Trinkwasser“, (abgerufen am 03.04.2017).Federal Environment Agency: "Assessment basis for metallic materials in contact with drinking water", (accessed on 03.04.2017).
Analyseberichte - PG9Q - Version 1
Analysis Report
X-Ray Fluorescence Analysis The sample was tested using X-ray fluorescence analysis and provided the following measurement result. The suitability for use in drinking water installations according to the Drinking Water Regulation (TrinkwV 2001) has thus been demonstrated.
Compliance with UBA The tested material complies with the requirements of the Federal Environment Agency regarding "Assessment criteria for metallic materials in contact with drinking water" - UBA positive list.
Standard DIN 50930-6 According to the Federal Environment Agency, the material meets the standard DIN 50930-6, which presents statements regarding corrosion resistance.
Material Data
Material CC757S (CuZn39Pb1Al-C)
Material Proposal CC575S_CuZn39Pb1Al
Manufacturer Number PG9Q
EAN 4250914802436
Report Number #2017-383
Measurement Results
Measurement Number 383
Mode Alloys
Measurement Duration 3.7s
Time 04.08.2017 11:08:56
Element Analysis
Element % ± 2σ Min Max
Copper Cu 61.041 ± 0.989 58.000 63.000
Zinc Zn 37.556 ± 0.854 33.500 41.500
Lead Pb 0.990 ± 0.230 0.200 1.400
Iron Fe 0.274 ± 0.100 0.000 0.300
Nickel Ni 0.137 ± 0.080 0.000 0.200
Tin Sn 0.000 ± 0.213 0.000 0.500
Manganese Mn 0.000 ± 0.078 0.000 0.050
Silicon Si 0.000 0.050
Aluminum Al 0.300 0.900
Company Information
Address Klingenbergstr. 12
City and Postal Code 31139 Hildesheim
Managing Director Olaf Manusch
Head of Engineering & Quality Assurance Marc Manusch
Date Saturday, April 8, 2017

PG8T

[pdf] PG8T-v1.0
Product Name and Article Number
Wanneneinlauf Artikelnummer: PG8TBathtub inlet Article number: PG8T
Components
Komponenten Nr. Komponente Anzahl 1 Sieb 1 2 Dichtung 1 3 Auslauf 1 4 Madenschraube 2 5 Blende 1 6 Madenschraube 2 7 Dichtung 1 8 O-Ring 2 9 Adapter 1Components No. Component Quantity 1 Sieve 1 2 Seal 1 3 Outlet 1 4 Grub screw 2 5 Cover plate 1 6 Grub screw 2 7 Seal 1 8 O-Ring 2 9 Adapter 1
Installation
Montage • Montieren Sie den Artikel wie im unteren Schaubild.Installation • Mount the article as shown in the diagram below.
Cleaning & Maintenance
Säuberung & Wartung Um eine gleichbleibende Qualität zu gewährleisten, ist folgendes zu beachten: • Mit sauberem Wasser abspülen & mit einem Mikrofasertuch trocknen. • Schmutz nur mit milden Reinigungsmitteln entfernen. • Benutzen Sie keine Scheuermilch, Polierpaste, Papiertücher, etc. • Benutzen Sie keine säurehaltigen Reinigungsmittel oder Seife.Cleaning & Maintenance To ensure consistent quality, please note the following: • Rinse with clean water and dry with a microfiber cloth. • Remove dirt only with mild detergents. • Do not use scouring milk, polishing paste, paper towels, etc. • Do not use acidic cleaning agents or soap.
Reservation Clause
Wir behalten uns das Recht vor, Aktualisierungen, Änderungen oder Ergänzungen an den bereitgestellten Informationen und Daten vorzunehmen.We reserve the right to make updates, changes or additions to the information and data provided.

[PDF] Allgemeine Pflegehinweise
Anschluss: Hochdruck - druckfest
Anschlussart: Unterputz-Einbaukörper (im Lieferumfang enthalten)
Anwendung: Kalt- und Warmwasserversorgung
Anwendungsbereich: Badewanne
Farbe: Chrom

1 of 1 reviews

Average rating of 5 out of 5 stars


100%

0%

0%

0%

0%


Leave a review!

Share your experiences with other customers.


1 review

October 15, 2021 - Manfred Brauer 🇩🇪 Deutschland
Verifizierter Kauf

Review with rating of 5 out of 5 stars

Fast delivery and very good quality.
KI-übersetzt (Originalsprache: de-DE) Original anzeigen
Laden...

3D-Modell wird geladen...

Maus: Drehen | Scrollen: Zoom | Rechtsklick: Verschieben Finger: Drehen | Pinch: Zoom | Zwei Finger: Verschieben