Skip to main content Skip to search Skip to main navigation
Bewertungsdurchschnitt mit

Average rating of 4.9 out of 5 stars

(4.91/5.00) aus insgesamt 2934 Bewertungen

Chromium

Our High Gloss Chrome redefines the standard. Through a precise multilayer process of polishing, nickel plating, and chrome plating, a flawless "Mirror Finish" is created. The surface impresses with its cool, bluish-silver shine and extreme hardness. Thanks to passing the 24-hour salt spray test (NSS), we guarantee maximum corrosion protection and ...

Faucet

  • Made of solid brass
  • High-quality chrome finish
  • 1/2" connections
  • Backflow prevention according to DIN EN 1717
  • Brand ceramic cartridge

Hand Shower

  • Elegant design hand shower
  • Made of plastic
  • High-quality chrome finish
  • Black / Chrome
  • 1 function
  • 35 anti-calc nozzles
  • Length 22 cm
  • Head 8 cm x 5 cm, up to 1 cm flat

Shower Rod

  • Round shower rod with cross handle
  • All parts made of solid brass
  • High-quality chrome plating
  • Adjustable angle of the holder
  • Length 70 cm
  • Distance between drill holes 63 - 65 cm

Shower Hose Length 160 cm

  • The dual 1/2" swivel cones prevent twisting of the hose.
  • Made of stainless steel, polished to a high shine
  • Double winding (overlapping) for high tensile strength
  • Kink-resistant, durable, flexible
  • Swivel cones made of solid brass, high-quality chrome finish
  • Certified: KTW recommendation, EN 1113, NF077
  • Made in Germany

Versand

  • Versandgewicht: 4.05 Kg
  • Versandart: Paket

Produktsicherheitsverordnung

Angaben zum Hersteller:

Name des Herstellers: PaulGurkes GmbH

Postanschrift: Bördestr. 7, 31135 Hildesheim, Deutschland

Elektronische Adresse: anfrage@paulgurkesshop.de


Letztes Update: 10.04.2026, 06:58:29

Für dieses Produkt wurden noch keine Kundenbilder hochgeladen.

Weitere Kundenbilder zu im Set enthaltenen Produkten

PaulGurkes Shower Mixer Wall-Mounted Single Lever Oval

PGFA33

€184.90*

PaulGurkes Metal Shower Rod with Cross Handle

PG6100

€124.90*

PaulGurkes Flat Cone Hand Shower

PG1392A

€24.00*

PaulGurkes Stainless Steel Shower Hose 160cm with Swivel Connectors

PGdoubleAgraff160

€20.85*

Dokumente der im Set enthaltenen Produkte

PGFA33

[pdf] Analysebericht-PGFA33
AnalyseberichtAnalysis Report
Die Probe wurde mittels Röntgenfluoreszenzanalyse getestet und hat folgendes Messergebnis erbracht.The sample was tested using X-ray fluorescence analysis and yielded the following measurement results.
Bericht-Nr.:Report No.:
Herstellernummer:Manufacturer number:
KupferCopper
ZinkZinc
BleiLead
ZinnTin
EisenIron
AluminiumAluminum
Der Nachweis über die Eignung in Trinkwasserinstallationen nach Trinkwasserverordnung (TrinkwV 2001) ist somit erbracht.The proof of suitability in drinking water installations according to the Drinking Water Ordinance (TrinkwV 2001) is thus provided.
Das geprüfte Material entspricht den Vorgaben des Umweltbundesamtes bezüglich der 'Bewertungsgrundlagen für metallene Werkstoffe im Kontakt mit Trinkwasser'- UBA-Positivliste. Der Werkstoff erfüllt laut Umweltbundesamt die Norm DIN 50930-6, die Aussagen bezüglich der Korrosionsbeständigkeit darlegt.The tested material complies with the requirements of the Federal Environment Agency regarding the 'Assessment criteria for metallic materials in contact with drinking water' - UBA positive list. According to the Federal Environment Agency, the material meets the DIN 50930-6 standard, which provides information on corrosion resistance.
Werkstoff: CW617N (CuZn40Pb2)Material: CW617N (CuZn40Pb2)
GeschäftsführerManaging Director
Leitung Technik & QualitätswesenHead of Technology & Quality Assurance
Umweltbundesamt: 'Bewertungsgrundlage für metallene Werkstoffe im Kontakt mit Trinkwasser', (abgerufen am 03.04.2017).Federal Environment Agency: 'Assessment basis for metallic materials in contact with drinking water', (accessed on 03.04.2017).
[pdf] PGFA33-v1.0
Components
Nr. Komponente AnzahlNo. Component Quantity
1 Armatur 11 Faucet 1
2 Madenschraube 42 Grub screw 4
4 Madenschraube 24 Grub screw 2
5 Wandblende 25 Wall cover 2
6 Dichtung 46 Seal 4
7 S-Anschluss 27 S-connector 2
8 Zertifikat unter: 0 www.paulgurkesshop.de8 Certificate under: 0 www.paulgurkesshop.de
Technical Data Ceramic Cartridge
Technische Daten KeramikkartuscheTechnical Data Ceramic Cartridge
KTW-Zulassung für TrinkwasserKTW approval for drinking water
Empfohlener Druck 1-5 BarRecommended pressure 1-5 Bar
Öffnungswinkel 25°Opening angle 25°
Maximale Temperatur 90°Maximum temperature 90°
Lebensdauer 70.000 Zyklen (EN 817)Lifespan 70,000 cycles (EN 817)
Operation
BedienungOperation
• Regeln Sie die Intensität des Wassers mit dem Griff wie in der Abbildung zu sehen. • Regeln Sie die Temperatur des Wassers durch Anwinkeln des Griffes wie abgebildet.• Adjust the intensity of the water with the handle as shown in the illustration. • Adjust the temperature of the water by angling the handle as shown.
Installation Steps
InstallationsschritteInstallation Steps
• Umwickeln Sie die S-Anschlüsse mit Teflonband oder Hanf um diese abzudichten. Drehen Sie diese in die vorhandenen Anschlüsse der Wand. • Montieren Sie die Blenden. • Spülen Sie die Leitung mindestens zwei Minuten, bevor Sie die Armatur an die S-Anschlüsse anschließen.• Wrap the S-connectors with Teflon tape or hemp to seal them. Screw them into the existing wall connections. • Mount the covers. • Flush the line for at least two minutes before connecting the faucet to the S-connectors.
Care Instructions
PflegehinweiseCare Instructions
• Farbige Oberflächen dürfen in keinem Fall mit scheuernden, ätzenden oder alkoholhaltigen Mitteln gereinigt werden. • Spülen Sie das Produkt mit klarem Wasser ab und trocknen es mit einem Mikrofasertuch.• Colored surfaces must not be cleaned with abrasive, corrosive or alcoholic agents. • Rinse the product with clear water and dry it with a microfiber cloth.
PaulGurkes Quality
PaulGurkes QualitätPaulGurkes Quality
• Herzlichen Glückwunsch zum Kauf Ihres PaulGurkes Qualitätsproduktes. Unsere Produkte sind technisch ausgereift und unter Verwendung hochwertiger Materialien gefertigt. • Jedes Produkt unterzieht sich einer handverlesenen Qualitätskontrolle. • Sollten Sie mit unseren Produkten nicht zufrieden sein, kontaktieren Sie uns.• Congratulations on purchasing your PaulGurkes quality product. Our products are technically sophisticated and made using high-quality materials. • Each product undergoes a hand-picked quality control. • If you are not satisfied with our products, please contact us.
Wir behalten uns das Recht vor, Aktualisierungen, Änderungen oder Ergänzungen an den bereitgestellten Informationen und Daten vorzunehmen.We reserve the right to make updates, changes or additions to the information and data provided.
Analyseberichte - PGFA33 - Version 1
Analysis Report
Analysis Report The sample was tested using X-ray fluorescence analysis and produced the following measurement result. The proof of suitability in drinking water installations in accordance with the Drinking Water Ordinance (TrinkwV 2001) is thus demonstrated. The tested material meets the requirements of the Federal Environment Agency regarding "Assessment bases for metallic materials in contact with drinking water" - UBA - Positive List. The material complies, according to the Federal Environment Agency, with the DIN 50930-6 standard, which sets out statements regarding corrosion resistance.
Material
Material CW617N (CuZn40Pb2)
Manufacturer Information
Report Number: #2017-240
Manufacturer Number: PGFA33
EAN: 4250914800777
Company: PaulGurkes GmbH
Street: Klingenbergstr. 12
City: 31139 Hildesheim
Analysis Report XL2-99147
Measurement Number: 240
Mode: Alloys
Measurement Duration: 9.0s
Time: 22.03.2017 13:35:05
Manufacturer Number: pgfa33
User Login: Marc Manusch
Material Suggestion: CW617N_CuZn40Pb2
Element Composition
Element % | ± 2σ | Min | Max
Copper Cu 59.603 | ± 0.624 | 57.000 | 60.000
Zinc Zn 38.107 | ± 0.536 | 37.000 | 41.500
Lead Pb 1.712 | ± 0.177 | 1.600 | 2.200
Tin Sn 0.142 | ± 0.113 | 0.000 | 0.300
Iron Fe 0.104 | ± 0.045 | 0.000 | 0.300
Nickel Ni 0.076 | ± 0.044 | 0.000 | 0.100
Aluminium Al 0.000 | | | 0.050
Signature
Place and Date: Hildesheim, Monday, April 3, 2017
Head of Engineering and Quality: Marc Manusch
Position: Head of Engineering and Quality
Managing Director: Olaf Manusch
Position: Managing Director
References
References: Federal Environment Agency: "Assessment bases for metallic materials in contact with drinking water", (accessed 03.04.2017).

[PDF] Allgemeine Pflegehinweise

0 of 0 reviews

Average rating of 0 out of 5 stars

Leave a review!

Share your experiences with other customers.


Laden...

3D-Modell wird geladen...

Maus: Drehen | Scrollen: Zoom | Rechtsklick: Verschieben Finger: Drehen | Pinch: Zoom | Zwei Finger: Verschieben